SPECIAL ITEM DETAIL

#2 - ADC-212/50 (New)  1 each. $650.00  Call to Order

Software Always FREE on Internet.

ADC-212/50 PC Oscilloscopes                 

 manuals   Brochures and manuals

PC oscilloscopes replaces bulky and expensive test equipment, saving money and space.                                                                                                                                        

 PC oscilloscope software
ADC212 oscilloscope / spectrum analyzer

Along with providing all the functionality of a conventional digital storage oscilloscope (DSO) the Pico Technology PC oscilloscope also has integrated spectrum analyzer and meter functions too.

The ADC-212/50 and ADC-212/100 PC oscilloscopes combine high sampling rates (up to 100 MS/s for single shot signals and up to 5 GS/s for repetitive signals) with a high resolution (12 bits). Together with the supplied software, your desktop or laptop PC can be used as a powerful dual channel oscilloscope / spectrum analyzer.

Deep memory buffers and advanced trigger modes allow the capture of large amounts of complex data at high speeds

Both units take advantage of a 128,000 sample memory buffer, enabling large amounts of data to be captured at high sampling rates. This allows engineers to capture fast-changing signals over relatively long periods of time. After capturing these signals, any areas of interest can be magnified in both axis, while still maintaining the detail in the waveform.

Ideal for audio, noise and vibration measurements

The 12-bit resolution in the Y-axis gives the ADC-212's the ability to detect changes as small as 0.024 per cent. Conventional 8-bit oscilloscopes only have the ability to detect changes greater than 0.4 per cent, but precision analogue and audio engineers require the ability to detection signal changes of less than 0.1 per cent.

The high dynamic range of the spectrum analyzer makes these products ideal tools for tracking down noise in sensitive analog circuits

Most digital storage oscilloscopes have front end amplifiers designed for high bandwidth, these products are no exception. Unlike most oscilloscopes, however, the front end amplifiers of the ADC-212/50 & ADC-212/100 PC oscilloscopes also exhibit very low levels of noise and distortion. This low noise and distortion, combined with the 12 bit resolution, gives an 80 dB dynamic range for the spectrum analyser.

Oscilloscopes that are light and portable

  • High speed, 5 GS/s dual channel oscilloscope
  • 50 MHz, 80 db dynamic range spectrum analyzer
  • High resolution - 12 bits
  • Large 128 thousand sample memory
  • 1% DC accuracy
  • Supplied complete with PicoScope software
  • Simply plugs into any desktop or laptop PC
 
 
 

By integrating several instruments into one small unit the ADC-212/50 and ADC-212/100 PC oscilloscopes offer any electronics field engineer with a standard notebook computer a cost-effective and simple-to-use solution with all the functionality of conventional test equipment without compromising on specifications.

See also the following application notes:-

 

 

ADC-212/50  Specifications

  ADC-212/50
Channels 2 x BNC + 1 external trigger
Analog bandwidth 25 MHz
Sampling rate
(single channel)
50 MS/s
Sampling rate
(dual channel)
50 MS/s
Sampling rate
(repetitive signals)
5 GS/s**
Resolution 12 bit
Buffer size 128 kS
Dynamic range 80 dB
Scope timebases 100 ns/div to 50 s/div
Spectrum ranges 0 to 25 MHz
Trigger modes Free run, Auto, Repeat & Single
Pre/ post trigger ±100 %
Voltage ranges ±50 mV to ±20 V in nine ranges
Overload protection ±100 V
Input impedance 1 MΩ
Coupling AC, DC
Accuracy ± 1%
Power supply 500 mA @ 12 V (mains adaptor supplied)
Output connector D25 to PC parallel port (cable supplied)
Dimension 140 x 190 x 45 mm   (5.51 x 7.48 x 1.77 in)
Supplied software PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger), Drivers and examples (C, Pascal, Visual Basic, Delphi, Labview, Testpoint, Aglient Vee, and Excel Macro). Software is supplied on CD and is compatible with Windows 95/98/ME/NT/2000/XP.
PP186